Omron PROFINET NX-PNC202 User Manual page 27

The following information is provided in the notched area on the Unit.
Name
Lot number and
unit version
Confirming Unit Versions with the Sysmac Studio
You can use Sysmac Studio to check unit versions. The confirmation method depends on the Sysmac
Studio.
 Checking Unit Versions with the Sysmac Studio
You can use the Production Information on the Sysmac Studio to check the unit versions of PROF-
INET Coupler Unit and NX Units.
1
Select Configurations and Setup in the Multiview Explorer and then select PROFINET. Dou-
ble-click the PROFINET Coupler Unit under PROFINET. Or, right-click the PROFINET Coupler
Unit and select Edit from the menu.
The Edit IO Device Terminal Configuration Tab Page is displayed.
You can also display the Edit IO Device Terminal Configuration Tab Page with any of the follow-
ing operations.
Double-click PROFINET under Configurations and Setup in the Multiview Explorer, right-click
the PROFINET Coupler Unit in the PROFINET Configuration Edit Tab Page, and select Edit IO
Device Terminal Configuration.
Or, select the PROFINET Coupler Unit on the PROFINET Configuration Edit Tab Page, and
then click the Edit IO Device Terminal Configuration button.
2
Go online.
NX-series PROFINET Coupler Unit User's Manual (W623)
Gives the lot number and unit version of the Unit.
• DDMYY: Lot number, : Used by OMRON.
"M" gives the month (1 to 9: January to September, X: October, Y: November, Z: December)
• 1: Unit version
The decimal portion of the unit version is omitted. (It is provided in the Unit specifications.)
Function
Unit Versions
25