Function Block Editing; Parameters; Setting The Number Of I/O Points And Output Point Settings - Omron G9SP Series Reference Manual

Function Block Editing

1-2

Function Block Editing

1-2-1

Parameters

1-2-2

Setting the Number of I/O Points and Output Point Settings

Setting the Number of I/O Points
Output Point Settings
Function blocks can be edited to set parameters, add optional I/O, and add
comments for the application. The displayed tabs and contents of the settings
depend on the function block.
The following parameters can be set for function blocks depending on the
user application. The parameters that can be set will vary from function block
to function block.
• Reset condition
• Input type
• Discrepancy time
Refer to SECTION 3 Descriptions of Function Blocks for information on the
parameters for each function block.
The number of inputs and the number of outputs for a function block can be
increased.
Optional outputs from function blocks can be enabled.
Tabs:
• Function block parameters
• Settings of the number of I/O points and output point settings.
• Comments
Section 1-2
5