Omron PROFINET NX-PNC202 User Manual page 173

4
Click the Yes button.
The specified data is transferred.
Precautions for Correct Use
• The PROFINET IO Controller may detect an error when the IO Device Terminal is restarted
after the IO Device Terminal setting information is transferred with a direct USB connection
between the Sysmac Studio and PROFINET Coupler Unit. If an error is detected, you need to
reset the error in the PROFINET IO Controller.
Refer to 9-3 Transferring and Comparing Settings on page 9-16 for a transfer method that
does not produce an error on the PROFINET IO Controller.
• When the IO Device Terminal is restarted, all of the Units on the IO Device Terminal perform
the same operation as when the power supply is cycled. Refer to the manuals for the specific
Units for the operation that is performed when the power supply is turned ON.
• The IO Device Terminal setting information must be the same between the PROFINET IO
Controller and the Profinet IO Device Terminal. When you transfer the IO Device Terminal
setting information, always use the synchronization function from the Sysmac Studio that is
connected to the CPU Unit.
NX-series PROFINET Coupler Unit User's Manual (W623)
9 Setting Up the PROFINET Coupler Unit
9
9 - 17