Omron PROFINET NX-PNC202 User Manual page 136

7 Wiring
 Installing DIN Track Insulation Spacers and DIN Track
Secure the DIN Track Insulation Spacers to the control panel with screws, and then secure the DIN
Track to the DIN Track Insulation Spacers. The recommended tightening torque for M4 screws is 1.2
N·m.
DIN Track
Insulation Spacers
• DIN Track Insulation Spacers
NX-AUX01 (OMRON Corporation)
10
6
Precautions for Correct Use
If you use DIN Track Insulation Spacers to install a Profinet IO Device Terminal, the height will
be increased by approximately 10 mm. Make sure that the Profinet IO Device Terminal and
connecting cables do not come into contact with other devices.
7 - 10
DIN Track
Control panel
35
10 14.8
M4
Screws, M4×10
NX-series PROFINET Coupler Unit User's Manual (W623)