Setting Io Device Terminal Parameters; Items To Set; Setting The Nx Unit Configuration Information - Omron PROFINET NX-PNC202 User Manual

9-2 Setting IO Device Terminal Parame-
ters
This section describes how to set the IO Device Terminal parameters with Support Software. The Sys-
mac Studio is used as an example.
For Support Software other than the Sysmac Studio, refer to the operation manual for the Support Soft-
ware that you are using.
9-2-1

Items to Set

The following settings must be adjusted in the IO Device Terminal.
Name
Configura- IO Device Ter-
tion infor- minal configura-
mation tion information
IO allocation
information
IO Device Terminal operation
settings
NX Unit application data
9-2-2

Setting the NX Unit Configuration Information

Specify the NX Unit configuration information for the IO Device Terminal, which consists of a PROF-
INET Coupler Unit and NX Units.
Settings in the NX Unit Configuration Information
 PROFINET Coupler Unit
The PROFINET Coupler Unit settings are listed below.
You can set only the items that have "Yes" in the Settable column.
NX-series PROFINET Coupler Unit User's Manual (W623)
9 Setting Up the PROFINET Coupler Unit
This information describes the configuration of the IO Device Terminal: the num-
ber and order of NX Units mounted after the PROFINET Coupler Unit, individual
NX Unit information, and information about the PROFINET Coupler Unit.
This information defines the IO data in the PROFINET Coupler Unit and the NX
Units.
The IO Device Terminal operation settings are for the PROFINET Coupler Unit
and the NX Units.
This data controls the functionality that is specific to each NX Unit. Not all NX
Units have Unit application data.
NX Units
PROFINET
Coupler Unit
NX Unit configuration information
Description
9
9 - 5