Setting The Nx Unit Configuration Information - Omron PROFINET NX-PNC202 User Manual

 NX Units
Name
Device name
Model name
Product name
Unit version
NX Unit Number
NX Unit Mounting
Setting
Serial Number
Supply Power/Avail-
able Power [W]
Power consumption
[W]
Unit width [mm]
IO allocation settings
Unit operation set-
tings

Setting the NX Unit Configuration Information

 Creating the Unit Configuration Information with the Edit IO Device Terminal
Configuration Tab Page
1
Create a new Sysmac Studio project.
2
Double-click NX-PNC202 under Configurations and Setup in the Multiview Explorer or
right-click NX-PNC202 under Configurations and Setup and select Edit.
NX-series PROFINET Coupler Unit User's Manual (W623)
Settable
Yes The name of the NX Unit.
This is the model number of the NX Unit.
This is the product name.
This is the Unit version of the NX Unit.
This number represents the logical position of the NX
Unit. Numbers are automatically assigned from the left-
most mounting position.
Yes This setting enables or disables the mounting of an NX
Unit. Refer to 11-2 NX Unit Mounting Settings on page
11-4 for details on this setting.
This is the serial number of the NX Unit. You can get
the serial number to set the serial number of the actual
PROFINET Coupler Unit.
The power that is currently drawn by the NX Units and
the maximum available power supply capacity are
given. This item is for an Additional NX Unit Power Sup-
ply Unit.
This is the power consumption of the NX Units from the
NX bus. This setting applies to Units other than an
Additional NX Unit Power Supply Unit.
This is the width of the NX Unit.
Yes These are the IO allocation settings for the NX Unit.
Click the Edit IO Allocation Settings button to edit
these settings. You cannot change this setting for Sys-
tem Units.
Yes These are the Unit operation settings for the NX Unit.
Click the Edit Unit Operation Settings button to edit
these settings. You cannot change this setting for Sys-
tem Units.
9 Setting Up the PROFINET Coupler Unit
Description
Data
Default
range
--- N* (Where * is a
serial number
from 1)
--- ---
--- ---
--- ---
--- ---
Enabled or Enabled
Disabled
--- 0
--- -/10.00
--- Refer to the
manual for the
specific NX Unit.
--- Refer to the
manual for the
specific NX Unit.
--- Refer to the
manual for the
specific NX Unit.
--- Refer to the
manual for the
specific NX Unit.
9 - 7
9