Io Device Terminal Parameters; Setting Procedures - Omron PROFINET NX-PNC202 User Manual

9 Setting Up the PROFINET Coupler Unit
9-1-2

IO Device Terminal Parameters

Parameters must be set to ensure that the IO Device Terminal operates as intended and performs data
exchange with other PROFINET devices. The settings are listed in the following table.
IO Device Termi-
nal configuration
and operation set-
tings
Refer to 9-2 Setting IO Device Terminal Parameters on page 9-5 for details on the settings.
9-1-3

Setting Procedures

Use the following procedures to set up an IO Device Terminal for connection to a third party PROFINET
IO Controller.
1
Setting PROFINET Cou-
pler Unit parameters with
Sysmac Studio
Refer to 9-2 Setting IO
Device Terminal Parame-
ters on page 9-5.
2
9-3 Transferring and Comparing Settings on page 9-16
3
9-4 Setting PROFINET IO Device Name on page 9-19
4
9-5 Setting PROFINET IO Data on page 9-20
5
9-6 NX Unit IO Allocation on page 9-27
9 - 4
Setting
Configuration NX Unit configuration infor-
information mation
IO allocation information
NX Unit operation settings
NX Unit application data settings
(1) Setting the NX Unit Configuration Information on page 9-5
(2) NX Unit IO Allocation on page 9-27
(3) Unit Operation Settings on page 9-10
(4) Unit Application Data on page 9-11
(5) Sysmac Studio Functions Used as Required on page
9-12
Description
This information describes the configura-
tion of the IO Device Terminal.
This information specifies what IO data in
the NX Units of the IO Device Terminal to
exchange with process data communica-
tions.
These are the operation settings for each
NX Unit in the IO Device Terminal.
These data settings enable the functional-
ity that is specific to each NX Unit.
NX-series PROFINET Coupler Unit User's Manual (W623)