Omron PROFINET NX-PNC202 User Manual page 169

Getting NX Unit Serial Numbers
If the serial number check method that is set in the PROFINET Coupler Unit is set to Setting = Actual
device, you must download the Unit configuration information in which the serial numbers for the NX
Units are set to the PROFINET Coupler Unit. Use the following procedure to apply the serial numbers
of the actual devices to the serial numbers of the NX Units in the Unit configuration information on the
Sysmac Studio. Refer to 9-2-2 Setting the NX Unit Configuration Information on page 9-5 for informa-
tion on checking serial numbers.
1
Go online, right-click anywhere in the Edit IO Device Terminal Configuration Tab Page, and
select Get Serial Numbers of All NX Units.
An execution confirmation dialog box is displayed.
2
Click the Get button.
The serial numbers are read from the actual Unit configuration, and applied to the Units in the
configuration information for the IO Device Terminal on the Sysmac Studio.
Exporting/Importing NX Unit Settings
On the Edit IO Device Terminal Configuration Tab Page, you can export the NX Unit operating settings
and NX Unit application data for each NX Unit into a single file (extension .nsf).
The exported NX Unit setting file can be imported to add other NX Units with the same settings. To do
this, go into the Edit IO Device Terminal Configuration Tab Page in a new project or the same project on
the Sysmac Studio.
1
On the Edit IO Device Terminal Configuration Tab Page, right-click the NX Unit to export and
select Export NX Unit Settings.
The Export NX Unit Settings Dialog Box is displayed.
2
Enter a file name, and then click the Save button.
An NX Unit setting file with an .nsf extension is saved.
To import a file, select Import NX Unit Settings and Insert New Unit in step 1, and specify the file to
import.
NX-series PROFINET Coupler Unit User's Manual (W623)
9 Setting Up the PROFINET Coupler Unit
9
9 - 13