Omron PROFINET NX-PNC202 User Manual page 209

Data
Unit application
data
Event logs
Additional Information
• IP address information is not altered when memory is cleared. Use the Network Configurator
to clear all PROFINET related parameters.
• With the option "Reset to Factory - Mode 2 Reset communication parameters" the device
name and IP address are reset to their default values.
Restarting After Clear All Memory Operation
Restarting is automatically performed after the Clear All Memory operation.
The following table gives the target of the Clear All Memory operation and the type of restart that is per-
formed after the Clear All Memory operation.
Target of Clear All Memory opera-
tion
Entire Profinet IO Device Terminal
PROFINET Coupler Unit
NX Unit
*1. The function to restart individual NX Units was added for a version upgrade.
The NX Unit is restarted if the unit versions of the NX Unit support restarting individual NX Units.
The IO Device Terminal is restarted if the unit version of the NX Unit does not support restarting individual NX
Units.
NX-series PROFINET Coupler Unit User's Manual (W623)
Status after Clear All Memory operation for each specification
Entire Profinet IO Device
Terminal
Refer to the manual for each
NX Unit for the operating
specifications when the Clear
All Memory operation is used
on NX Units that have Unit
application data.
Event logs are cleared if you
select the Clear event log
Option when you execute the
Clear All Memory operation.
Restarting the IO Device Terminal.
Restarting the IO Device Terminal.
Restarting the IO Device Terminal or the NX Unit.
11 PROFINET Coupler Unit Functions
PROFINET Coupler Unit
---
Event logs are cleared if you
select the Clear event log
Option when you execute the
Clear All Memory operation.
Type of restart
NX Unit
Refer to the manual for each
NX Unit for the operating
specifications when the Clear
All Memory operation is used
on NX Units that have Unit
application data.
Event logs are cleared if you
select the Clear event log
Option when you execute the
Clear All Memory operation.
*1
11 - 17
11