Setting Redial Options; Configuring Visual Alerts; Setting The Audio Path - Avaya 9621G Instruction Manual

4. Tap Save.

Setting redial options

About this task
Use this task to view a list of last four numbers that you dialed or to dial the last dialed number
when you use the redial feature.
Procedure
1. Press Main Menu.
2. Tap Settings > Options & Settings > Call Settings > Redial.
3. Tap to select one of the following options:
• One Number: To dial the last dialed number.
• List: To display the last four dialed numbers.
4. Tap Save.

Configuring visual alerts

About this task
Use this task to cause the LED in the top right corner of the phone to flash when the phone gets
incoming calls.
Procedure
1. Press Main Menu.
2. Tap Settings > Options & Settings > Call Settings > Visual Alerting.
3. Tap to select On or Off.
4. Tap Save.

Setting the audio path

About this task
Sets your phone to receive calls on the Speaker or the Headset.
Procedure
1. Press Main Menu.
2. Tap to select Settings > Options & Setting > Call Settings > Audio Path.
3. Tap to select Headset or Speaker.
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP
Comments on this document? infodev@avaya.com
Settings
31