Propeller Shaft Holder Assembly [*1] - Honda BF135A Manual

Hide thumbs Also See for BF135A:
Table of Contents

Advertisement

4. PROPELLER SHAFT HOLDER
ASSEMBLY [*1]
a. REMOVAL/INSTALLATION
Remove the following parts.
– Propeller (P. 14-2)
– Gear case assembly (P. 14-3)
– Water pump/shift rod (P. 14-7)
1) Remove the two 10 mm washers and the two 10 x 40 mm
flange bolts.
2) Insert a screwdriver or equivalent tool into the recess in the
propeller shaft holder and remove the propeller shaft
holder assembly from the gear case.
Installation is the reverse order of removal.
[1]
GEAR CASE ASSEMBLY
14-17
[1]
RECESS
[2]
PROPELLER SHAFT
HOLDER ASSEMBLY
10 x 40 (2)
34 N . m (3.5 kgf . m, 25 lbf . ft)
[2] PROPELLER SHAFT
HOLDER ASSEMBLY
[3]
10 mm WASHER (2)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Marine bf150a

Table of Contents