Honda BF135A Manual page 643

4) Remove the shift arm from the shift shaft B while pulling
the detent arm to your side.
5) Remove the 6 x 14 mm flange bolt from the neutral switch
bracket while pulling the detent arm toward you, then
remove the neutral switch bracket.
6) Release the fuel tube A from the fuel tube holder.
7) Remove the fuel tube holder from the neutral switch
bracket.
8) Remove the neutral switch 2P connector from the
connector bracket A, then disconnect the connector.
9) Remove the harness band clip that secures the alternator
fuse cable from the neutral switch bracket.
10) Remove the clip A from the neutral switch wire.
17-12
[1]
DETENT
ARM
[4]
Pull to your side.
6 x 14
[3]
DETENT ARM
[2]
NEUTRAL SWITCH
2P CONNECTOR
[1]
FUEL TUBE HOLDER
[7]
NEUTRAL
SWITCH
BRACKET
[5]
HARNESS
BAND CLIP
[6]
ALTERNATOR
FUSE CABLE
[2]
SHIFT ARM
[3]
SHIFT
SHAFT B
[1]
(Pull in the direction
of the arrow.)
[2]
NEUTRAL SWITCH
BRACKET
[3]
CONNECTOR
BRACKET A
[4]
CLIP A