Honda BF135A Manual page 314

b. DISASSEMBLY
Remove the eight 5 x 12 mm self-tapping screws and remove the silencer duct A.
c. COMPONENTS DRAWING
[1]
5 x 12 mm SELF-TAPPING
SCREW (8)
6 x 25 (4)
[11]
6 mm WASHER (4)
[10]
3.5 mm TUBE
CLIP (2)
[9]
BREATHER TUBE
[8]
PRESSURE REGULATOR
CONTROL TUBE
d. ASSEMBLY
Install the silencer duct A on the silencer duct B and tighten the eight 5 x 12 mm self-tapping screws securely.
6-3
[7] HARNESS
BAND CLIP
[2] 18.5 mm CLAMP
[3] SILENCER DUCT A
[4] SILENCER DUCT B
[5]
DUCT GROMMET (4)
[6]
DUCT COLLAR (4)