Honda BF135A Manual page 334

j. INSTALLATION
1) Position the alternator assembly over the tensioner bolt and loosely tighten the 8 mm flange nut.
2) Position the alternator assembly between the projections of the alternator bracket and loosely tighten the 10 x 80 mm
flange bolt.
10 x 80
[4]
Between the
projections
3) Install the alternator belt on the crankshaft pulley first, then
on the alternator pulley.
NOTICE
Do nut turn the crankshaft pulley counterclockwise.
6-23
[1] ALTERNATOR
ASSEMBLY
[3] TENSIONER BOLT
[1] ALTERNATOR
BELT
[2]
8 mm FLANGE
NUT
[2] CRANKSHAFT
PULLEY
[3] ALTERNATOR
PULLEY