Honda BF135A Manual page 668

e. INSTALLATION
1) Apply the engine oil to the new O-ring.
2) Set the two 10 x 90 mm flange bolts on the starter motor, and install both the starter motor and the two 10 x 90 mm
flange bolts on the engine.
3) Tighten the two 10 x 90 mm flange bolts to the specified torque.
TORQUE: 44 N . m (4.5 kgf . m, 33 lbf . ft)
4) Connect the starter cable to the starter magnetic switch and tighten the 8 mm washer-nut to the specified torque.
TORQUE: 11 N . m (1.1 kgf . m, 8 lbf . ft)
5) Install the 8 mm washer and the alternator fuse cable on the starter magnetic switch and tighten the 8 mm washer-
nut to the specified torque.
TORQUE: 11 N . m (1.1 kgf . m, 8 lbf . ft)
6) Connect the main relay (White) terminal to the starter magnetic switch.
7) Install the terminal cover securely.
[1]
8 mm WASHER-NUT
11 N . m (1.1 kgf . m, 8 lbf . ft)
[2]
STARTER MOTOR
18-14
[3]
8 mm WASHER
[1]
8 mm WASHER-NUT
11 N . m (1.1 kgf . m, 8 lbf . ft)
[4]
ALTERNATOR FUSE CABLE
[5]
STARTER CABLE
[6]
MAIN RELAY
TERMINAL (W)
[7]
10 x 90 (2)
Install on the engine together
with the starter motor.
TORQUE:
44 N . m (4.5 kgf . m, 33 lbf . ft)
[8]
STARTER MAGNETIC
SWITCH
[9]
O-RING
Do not reuse.