Honda BF135A Manual page 148

Hide thumbs Also See for BF135A:

Table of Contents

UNDER COVER FRONT BRACKET:

1) Install the bracket cap.

2) Apply marine grease to the front lock shaft and the outer

surface of the cover lock bushing.

3) Apply marine grease to the outer surface of the cover lock

hook spring. Install the cover lock hook spring aligning its

hook with the hole in the front lock.

4) Set the front lock in the position shown. Install the front

lock on the under cover front bracket at an inclined angle.

5) Install the cover lock hook spring on the under cover front

bracket aligning its hook with the hole in the under cover

front bracket.

6) Apply marine grease to the outer surface of a cover lock

bushing A and install it on the under cover front bracket.

7) Install the 8 mm washer and the 6 mm E-ring on the front

8) Apply marine grease to the outer surface of the cover open

shaft, lock lever return spring, 8 mm washer and the cover

lock bushing B. Install the lock lever return spring, 8 mm

washer, and the cover lock bushing B on the cover open

Hold the lock lever return spring compressed with the

cover lock bushing B.

9) Install the cover open shaft at an inclined angle in the under

cover front bracket.

10) Install the cover lock bushing B in the under cover front

11) Install the 6 mm E-ring on the cover open shaft.

[2] 6 mm E-RING

[1] COVER LOCK

[8] COVER LOCK

[6] FRONT LOCK

[10] UNDER COVER

FRONT BRACKET

[5] COVER LOCK

[2] (MARINE GREASE)

Troubleshooting

Marine bf150a