Honda BF135A Manual page 333

18) Position the alternator pulley on the rotor shaft and tighten
the pulley lock nut.
19) Tighten the pulley lock nut to the specified torque using a
10 mm offset wrench and a torque wrench.
TORQUE: 110 N . m (11.2 kgf . m, 81 lbf . ft)
i. ALTERNATOR BRACKET ASSEMBLY
1) Tighten the alternator bracket with the four 8 x 28 mm
flange bolts securely.
2) Tighten the 6 x 16 mm flange bolt securely while pushing
the alternator stay against the projection on the alternator
bracket.
3) Position the special adjusting bolt on the tensioner bolt.
4) Install the engine hanger B with the two 8 x 20 mm flange
bolts.
6-22
8 x 28 (4)
[6] TENSIONER BOLT
[1]
ALTERNATOR
PULLEY
[5]
TORQUE
WRENCH
[4]
10 mm
OFFSET
WRENCH
8 x 20 (2)
[1]
ENGINE
HANGER B
[2]
ALTERNATOR
BRACKET
[3]
PROJECTION
[2]
PULLEY LOCK
NUT
[3] PULLEY LOCK
NUT
[4]
ALTERNATOR
STAY
6 x 16
[5]
SPECIAL ADJUSTING
BOLT