4) Remove the 3 x 12.8 mm roller from the shift slider
assembly using a commercially available pin driver.
5) Remove the shift plate from the shift slider, then remove
the two shift springs and the two #9 steel balls.
NOTICE
Take care not to let the shift springs and the #9 steel balls
pop out of the shift slider during removal of the shift plate.
6) Prepare the fixing tool of the dimensions shown.
14-58
[1]
3 x 12.8 mm ROLLER
[2]
#9 STEEL BALLS
[1]
SHIFT SLIDER
[4]
SHIFT SPRINGS
60 mm
(2.4 in)
ø10 (0.4 in)
30 mm
(1.2 in)
69.5 mm
(2.74 in)
69.5 mm
(2.74 in)
[2]
SHIFT SLIDER
ASSEMBLY
[3]
SHIFT PLATE
300 mm
(11.8 in)
ø35 (1.4 in)
ø10
(0.4 in)