Honda BF135A Manual page 385

BF135A:
NOTICE
• Note the location of each part before disassembly. Do not
confuse the parts and install them in their original positions.
• Check the camshaft contact surface of each rocker arm for
wear or damage.
• Insert the bolts in the rocker shaft holders before removing or
installing the rocker arm assembly from/on the cylinder head.
Apply molybdenum disulfide oil to the outer surface of the intake/exhaust rocker shafts on assembly.
[1] MOLYBDENUM
DISULFIDE OIL
[11]
INTAKE ROCKER
SHAFT
[10]
RUBBER BAND
10-12
[2]
INTAKE ROCKER
ARM ASSEMBLY
[4]
No.1 ROCKER SHAFT HOLDER
[5]
No.2 ROCKER SHAFT HOLDER
[6]
No.3 ROCKER SHAFT HOLDER
[7]
No.4 ROCKER SHAFT HOLDER
[9]
No.5 ROCKER SHAFT HOLDER
[3]
EXHAUST
[1] MOLYBDENUM
ROCKER ARM
DISULFIDE OIL
[8]
EXHAUST ROCKER
SHAFT