Honda BF135A Manual page 636

c. INSTALLATION
1) Set the indicator light wire and the remote control cable in
the specified positions in the remote control cable
grommet. Be sure that the tie wires on the indicator light
wire and the remote control cable are set against the
remote control cable grommet.
2) Set the starter cable in the specified position in the remote
control cable grommet by aligning the end of the white
tape on the starter cable with the end of the under cover
front bracket as shown.
3) Set the fuel tube A and the speed sensor tube A in the
specified positions of the remote control cable grommet.
17-5
[1]
INDICATOR LIGHT WIRE
[6]
REMOTE CONTROL
CABLE GROMMET
[1]
UNDER COVER
FRONT BRACKET
[4] TIE WIRES
[5]
REMOTE
CONTROL CABLE
[6]
INDICATOR
LIGHT WIRE
[2]
REMOTE CONTROL
CABLE
[3]
SPEED SENSOR
TUBE A
[1]
INDICATOR
[5]
LIGHT WIRE
STARTER
CABLE
[5]
STARTER
CABLE
[2]
WHITE TAPE
[3]
STARTER CABLE
[7] REMOTE CONTROL
CABLE GROMMET
[4]
FUEL TUBE A
[2]
REMOTE
CONTROL
CABLE
[3]
SPEED
SENSOR
TUBE A
[4]
FUEL
TUBE A