Honda BF135A Manual page 659

5) Remove the gear shaft and the gear shaft stopper. Remove
the internal gear and the overrunning clutch.
• BRUSH HOLDER DISASSEMBLY
1) Remove the clip and the plate.
2) Remove the brush sets and the brush springs.
c. INSPECTION
• BRUSH LENGTH
Measure the brush length. Replace the brushes as a set if the
measurement is less than the service limit.
STANDARD
12.3 mm (0.48 in)
18-5
SERVICE LIMIT
7.0 mm (0.28 in)
[1] GEAR SHAFT STOPPER
[4]
INTERNAL GEAR
[3]
GEAR SHAFT
[1]
PLATE
[4]
BRUSH
SPRING (4)
[3]
BRUSH HOLDER
[2]
ONE-WAY CLUTCH
[2] BRUSH SET