Honda BF135A Manual page 674

b. PGM-FI MAIN RELAY/CONNECTOR BRACKET B REMOVAL/INSTALLATION
Remove the following parts.
– Engine cover (P. 4-2)
– R. engine under cover (P. 4-9)
– Electric part cover/ECM (P. 18-19)
Disconnect the PGM-FI main relay connector wire and the alternator fuse cable from the starter motor.
On installation, position each connector and harness in the proper position (P. 2-48 through P. 2-51).
6 x 16 (2)
5 N . m (0.5 kgf . m, 3.6 lbf . ft)
[9]
CONNECTOR
BRACKET B
6 x 10
[8]
HARNESS BAND
CLIP (4)
[7]
PGM-FI MAIN RELAY
CONNECTOR WIRE
[6]
ALTERNATOR
FUSE CABLE
18-20
[1]
PGM-FI MAIN RELAY
INSPECTION: P. 18-24
[2]
UNIT SUSPENSION (2)
[3]
RELAY
SUSPENSION
[4]
LAF RELAY
INSPECTION: P. 18-25
[5]
POWER TILT SWITCH
INSPECTION: P. 4-12