Remote Control Lever Friction; Alternator Belt - Honda BF135A Manual

Hide thumbs Also See for BF135A:

Table of Contents

<Side-mount remote control type only>

1) Remove the remote control box cover B and C (P. 16-2).

2) Move the remote control lever to the full open position and

be sure that the link joint arm is in contact with the 5 x 16

mm hex. bolt.

If not in contact, tighten the 5 x 16 mm hex. bolt unit it

contacts the link joint arm.

3) Install the remote control box cover B and C (P. 16-2).

13. REMOTE CONTROL LEVER

Inspection/Adjustment:

1) Check the remote control lever for smooth operation.

If the lever movement is too light or too heavy, adjust the

2) Adjust by turning the friction adjusting bolt right or left.

1) Remove the engine cover (P. 4-2).

Remove the silencer duct assembly (P. 3-11 and 12).

2) Check the alternator belt for wear and damage.

Replace the alternator belt if necessary (P. 3-29).

3) Check the alternator belt and the related parts for stain with

oil, etc. If stained, clean the stained parts and replace the

alternator belt.

4) Check the belt tension and belt deflection (P. 3-29).

[1] FRICTION ADJUSTING BOLT

[1] 5 x 16 mm

[2] LINK JOINT ARM

[1] ALTERNATOR

Troubleshooting

Marine bf150a