Honda BF135A Manual page 141

3) Remove the 6 mm E-ring from the cover open shaft.
Remove the cover lock bushing B in a manner of bringing
it to the lock lever return spring side.
With the return spring compressed with the bushing B,
hold the cover open shaft at a slightly inclined angle.
Remove the cover open shaft with care not to let its head
contact the under cover front bracket.
4) Remove the cover lock bushing B, 8 mm washer, and the
lock lever return spring from the cover open shaft.
Check the cover lock bushing B for scores, scratches and
other damage. Replace the cover lock bushing B with a new
one if necessary.
5) Remove the 6 mm E-ring, 8 mm washer and the cover lock
bushing A from the front lock.
Check the cover lock bushing A for scores, scratches and
other damage. Replace the cover lock bushing A with a new
one if necessary.
6) Lower the front lock and detach the hook of the cover lock
hook spring from the hole in the under cover front bracket.
Remove the cover lock bushing from the under cover front
bracket and hold it at the front lock side.
7) Set the front lock in the position shown.
With the front lock set at a slightly inclined angle in the
position shown, remove the front lock from the under cover
front bracket.
Remove the cover lock bushing and the cover lock hook
spring from the front lock.
8) Remove the bracket cap.
4-22
[1]
COVER OPEN
SHAFT
[4]
COVER LOCK
BUSHING B
[4]
COVER LOCK
BUSHING B
[7]
LOCK
LEVER
RETURN
SPRING
[6] 8 mm WASHER
[1] COVER OPEN SHAFT
[1] FRONT LOCK
[7]
BRACKET
CAP
[6]
COVER LOCK
BUSHING
[1] FRONT
LOCK
[2]
UNDER
COVER
FRONT
BRACKET
[3] HEAD
[5] 6 mm E-RING
[2] 6 mm E-RING
[3]
8 mm WASHER
[4]
COVER LOCK
BUSHING A
[5]
COVER LOCK
HOOK SPRING