Overview Of Ctp Bundles; Types Of Bundles Overview - Juniper CTP Series Manual

CHAPTER 1

Overview of CTP Bundles

Types of Bundles Overview

Table 1: Bundle Types and Supported Interfaces
Bundle Type
CTP (circuit-to-packet)
Copyright © 2018, Juniper Networks, Inc.
Types of Bundles Overview on page 3
Interface Naming Conventions for the CTP Series on page 4
Serial Multiservice Interface Module Overview on page 5
Adaptive Clocking Overview for CTP Bundles on page 7
Determining Optimal Packet Size for CTP Bundles Overview on page 8
Providing QoS for CTP Bundles by Using Service Type Overview on page 10
Circuit Startup Process Overview on page 11
Transparent Encoding Overview on page 12
TDM/TDC Encoding Overview on page 17
Table 1 on page 3 shows the typical application for each bundle type, and lists the
interfaces that each type of bundle supports.
Generally Used For
Connecting legacy serial interfaces to
the IP network
Interface Types Supported
CTP150
Serial interface
Multiservices interface
T1/E1 interface
CTP2000
Multiservices interface
Serial interface
Serial interface with T1/E1 daughter
card
Serial interface with 4WTO
daughter card
Serial interface with IRIG-B
daughter card
T1/E1 interface
3