Table of Contents
Advertisement
Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3
Table 65: BERT Parameter Settings in the CTP Menu (continued)
Field
Function
BERT Pattern
Specifies the type of BERT pattern.
BERT patterns are compatible with the external BERT
equipment that you are using. All patterns except 2^31-1
are compatible with the Fireberd 6000.
When you set up a bidirectional end-to-end BERT, you
must configure the same pattern on both bundles.
BERT Error
The BERT transmitter injects an error into the pattern
Inject
to verify that an end-to-end BERT has been established.
Related
Documentation
166
BERT Testing for CTP Bundles Overview on page 158
Displaying BERT Status and Counters for CTP Bundles (CTP Menu) on page 168
Your Action
Select one:
MARK
ALT
511
2047
2^15-1
2^20-1
2^23-1
2^29-1
2^31-1
2^4-1
Enter 5) BERT Error Inject to inject an error into the
pattern.
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
