Juniper CTP Series Manual page 154

Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3
Table 59: CTP Bundle Runtime State and Counters in the CTP Menu (continued)
Field Name Field Description
Buf Displays the maximum, running state, and minimum buffer sizes, in terms of milliseconds. The number
Max/Set/Min(ms) that you entered varies depending on the type of interface and signaling. The set buffer size denotes the
buffer size when the circuit enters a running state.
IP Hdr TOS Displays the ToS byte to be used in IP headers of packets sent from the CTP device to the IP network.
The ToS setting is applied to circuits created by the bundle for which the service type is configured.
IP Proto/OAM Port Displays the port configured for IP protocol and OAM applications.
Port(s) in bundle Displays the interfaces that are part of the configured bundle.
Bndl Desc Displays the description of the bundle, which enables easy identification.
Bndl Config Flags Displays the current configuration of the bundle:
PProtTx—Indicates that the packet protector is set to "Send cloned packets to NET". The CTP device
uses cloned packets that it receives when the IP network drops the original packet. If the device receives
both the original and cloned packets, it ignores the cloned packet.
PProtRx—Indicates that the packet protector is set to "Expect cloned packets from NET". The CTP
device uses cloned packets that it receives when the IP network drops the original packet. If the device
receives both the original and cloned packets, it ignores the cloned packet.
PProtTx PProtRx—Indicates that the packet protector is set to "Send & expect cloned packets". The
CTP device sends duplicated packets over the IP network. The CTP device uses cloned packets that
it receives when the IP network drops the original packet.
PProtTxDel—Indicates that the packet protector is set to "Send delayed cloned packets to NET". The
CTP device sends duplicated packets after the interpacket delay of the circuit.
PProtTxDel PProtRx—Indicates that the packet protector is set to "Send delayed & expect cloned
packets". The CTP device sends duplicated packets after the interpacket delay of the circuit. The CTP
device uses cloned packets that it receives when the IP network drops the original packet.
PProtRxXor—Indicates that the packet protector is set to "Expect cloned XOR packets". The CTP
device uses cloned XOR packets that it receives when the IP network drops the original packet to
regenerate the missing packet. If the device receives both the original and cloned XOR packets, it
ignores the cloned packet.
PProtTxXor PProtRxXor—Indicates that the packet protector is set to "Send & expect cloned XOR
packets". The CTP device sends duplicated XOR packets over the IP network. The CTP device uses
cloned XOR packets that it receives to regenerate missing packets when the IP network drops the
original packet.
PProtTxXor—Indicates that the packet protector is set to "Send cloned XOR packets". The CTP device
sends duplicated XOR packets over the IP network.
Port Config
Interface type Displays the type of interface.
The type of interface that you select affects the default packet size and buffer sizes for the bundle.
148 Copyright © 2018, Juniper Networks, Inc.