Configuring Multiservice IRIG-B Mode Port Parameters for CTP Bundles (CTP Menu)
Table 34: CTP Bundle Multiservice IRIG-B Port Parameter Settings in the CTP Menu
Field
Mode
Copyright © 2018, Juniper Networks, Inc.
Before you begin:
Disable the bundle before you modify the bundle options.
To configure Multiservice IRIG-B mode port parameters using the CTP Menu:
From the CTP Main Menu, select 1) Bundle Operations.
1.
Select 1) CTP.
2.
Select a bundle from the list.
3.
If you select an active bundle, you are prompted to disable the bundle before
configuring it.
Select 3) Port Config.
4.
Select 2) Interface.
5.
Select 1) Type and set the type to Optional Interface: MultiSvc.
6.
Follow the onscreen instructions and configure the options as described in
7.
Table 34 on page
81.
Function
Specifies that the bundle will run in
IRIG-B mode.
Chapter 2: Configuring CTP Bundles
Your Action
Select IRIG.
81