Table of Contents
Advertisement
Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3
Table 32: CTP Bundle Multiservice 4WTO Mode Port Parameter Settings in CTPView (continued)
Field
4WTO Sample Rate [ KHz ]
4WTO μ-law Encoding
4WTO Squelch
4WTO Channel 0 Output Level
4WTO Channel 1 Output Level
See Also
Configuring Multiservice Port Parameters for CTP Bundles (CTP Menu)
78
Function
Sample rate for audio circuits in kilohertz.
The sample rate determines the audio
quality and the network bandwidth
needed.
4WTO μ-law encoding is not
configurable.
Enables or disables the active squelch
function on the circuit.
If enabled, specifies whether the squelch
is active or inactive.
The squelch function gates local audio
output when DSR-A (channel 0) or
RTS-A (channel 1) inputs are active or
inactive.
Specifies the output level for channel 0.
Note the following information about the
values:
0—There is no output.
128—Unity gain, which means there is
no attenuation or gain.
255—Gain is 2:1.
Specifies the output level for channel 1.
Note the following information about the
values:
0—There is no output.
128—Unity gain, which means there is
no attenuation or gain.
255—Gain is 2:1.
Serial Multiservice Interface Module Overview on page 5
Configuring 4WTO Port Parameters for CTP Bundles (CTPView) on page 86
Configuring Multiservice Audio Mode Port Parameters for CTP Bundles (CTP
Menu) on page 79
Configuring Multiservice IRIG-B Mode Port Parameters for CTP Bundles (CTP
Menu) on page 81
Your Action
Sample rate is fixed at 8 KHz, which
corresponds to standard toll quality
voice.
4WTO μ-law encoding is fixed at
DISABLED.
Select one:
DISABLED—Disables the active
squelch function on the circuit
ENABLED/ACTIVE—Squelch input is
grounded and analog output is
disabled.
ENABLED/INACTIVE—No signal is
applied to the squelch input. Input is
open and analog output is possible.
Enter a number from 0 through 255.
Enter a number from 0 through 255.
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
