Table of Contents
Advertisement
CHAPTER 8
Displaying BERT Status and Counters for
CTP Bundles
Displaying BERT Status and Counters for CTP Bundles (CTPView)
Copyright © 2018, Juniper Networks, Inc.
Displaying BERT Status and Counters for CTP Bundles (CTPView) on page 167
Displaying BERT Status and Counters for CTP Bundles (CTP Menu) on page 168
This topic describes how to display BERT status and counters.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to change the status
of the bundles.
To view BERT status and counters:
In the side pane, select Bundle > Diagnostics.
1.
Click Bit Error Rate Tester.
2.
Run your mouse over the MouseOver to Select a Port to Display bar.
3.
A list of bundles configured on the CTP device appears.
In the table of bundles, select the bundle that you want to view.
4.
The BERT configuration and counters page appears.
the status and the counter fields.
Table 66 on page 168
describes
167
Advertisement
Table of Contents
