Table of Contents
Advertisement
CHAPTER 4
Querying CTP Bundles
Displaying Running CTP Bundle Configuration, State, and Counters (CTPView)
Copyright © 2018, Juniper Networks, Inc.
Displaying Running CTP Bundle Configuration, State, and Counters
(CTPView) on page 139
Displaying the NetRef Node Synchronization Information (CTP Menu) on page 143
Displaying the Running CTP Bundle Configuration, State, and Counters (CTP
Menu) on page 145
This topic describes how to display the running configuration of your bundle, along with
the state and various counters.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to change the status
of the bundles.
To view information about the bundle:
In the side pane, select Bundle > Runtime Query.
1.
Run your mouse over the MouseOver to Display and Select Bundles to Display bar.
2.
In the table of bundles, select the bundles that you want to view, and click Display
3.
Selected Bundles. To select multiple bundles, hold down the CTRL key.
The configuration of the bundle or bundles appears followed by the runtime state
and counters.
Table 57 on page 140
describes the fields in the state and counters sections of the
display.
The signaling configuration appears only if you changed the signaling configuration
from the default configuration.
139
Advertisement
Table of Contents
