Table of Contents
Advertisement
Using Bundles to Create Logical Configurations for Physical Interfaces, CTP Release 7.3, CTPView Release 7.3
Table 49: Clocking Type Supported for Each Encoding Type as Displayed in the CTP
Menu (continued)
Encoding Type
ISOCH
CDI
TRANS
108
Clocking Type Supported
You can specify the following clocking methods for ISOCH circuits:
Adaptive Rate, Ext Tx Clk (TT)—Adaptive clocking with external TX clock (TT).
Adaptive Rate, w/o Ext Tx Clk (TT)—Adaptive clocking with internal clock.
Autobaud Rate, Ext Tx Clk (TT)—Autobaud rate with internal clock.
Autobaud Rate, w/o Ext Tx Clk (TT)—Autobaud rate with external clock.
ISOCH - Master End—This end of the circuit generates a clock signal and sends it to
the remote end. Configure
ISOCH - Adaptive End
ISOCH - Adaptive End—This end of the circuit uses adaptive clocking to receive the
clock signal from the remote end. The clock slave uses its period to determine when
to sample data and how to transmit data across the link.
Custom—The custom clocking configuration is used.
You can specify the following clocking methods for CDI circuits:
Adaptive Rate, Ext Tx Clk (TT)—Adaptive clocking with external TX clock (TT).
Adaptive Rate, w/o Ext Tx Clk (TT)—Adaptive clocking with internal clock.
Autobaud Rate, Ext Tx Clk (TT)—Autobaud rate with internal clock.
Autobaud Rate, w/o Ext Tx Clk (TT)—Autobaud rate with external clock.
CDI - Master End—This end of the circuit generates a clock signal and sends it to the
remote end. Configure
CDI - Adaptive End
CDI - Adaptive End—This end of the circuit uses adaptive clocking to receive the clock
signal from the remote end. The clock slave uses its period to determine when to
sample data and how to transmit data across the link.
Custom—The custom clocking configuration is used.
You can specify the following clocking methods for TRANS circuits:
Adaptive Rate, Ext Tx Clk (TT)—Adaptive clocking with external TX clock (TT).
Adaptive Rate, w/o Ext Tx Clk (TT)—Adaptive clocking with internal clock.
Autobaud Rate, Ext Tx Clk (TT)—Autobaud rate with internal clock.
Autobaud Rate, w/o Ext Tx Clk (TT)—Autobaud rate with external clock.
TRANS - Master End—This end of the circuit generates a clock signal and sends it to
the remote end. Configure
TRANS - Adaptive End
TRANS - Adaptive End—This end of the circuit uses adaptive clocking to receive the
clock signal from the remote end. The clock slave uses its period to determine when
to sample data and how to transmit data across the link.
Custom—The custom clocking configuration is used.
at the remote end.
at the remote end.
at the remote end.
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
