Nortel Communication Server 1000 Manual page 84

84 Integrated Digital Access (IDA) equipment
Table 37
NT5K23 and NT5K75 power requirements (cont'd.)
Voltage
+12 Volt
-12 Volt
NT6D11AE power requirements
The power requirements for the NT6D11AE are shown in
"NT6D11AE power requirements" (page
Table 38
NT6D11AE power requirements
Voltage
+5 Volt
+12 Volt
-12 Volt
NT5K35, NT5K75, NT6D11AE faceplates
The NT5K35, NT5K75 and NT6D11AE DCHIs have one light-emitting-diod
e (LED) to indicate an active or inactive state and two external connectors:
•
Port 0 is a standard asynchronous port providing an interface for
non-IDA applications. This port should only be used for testing or
debugging DASS2 links.
•
Port 1 is the D-channel Interface port.
Figure 15 "NT5K35, NT5K75, NT6D11AE DCHI faceplate layout" (page
85) illustrates the layout of the NT5K35, NT5K75 and NT6D11AE card
faceplates.
Worst case consumption
50 milliamperes
50 milliamperes
Worst case consumption
3.0 Amp
0.75 Amp
0.75 Amp
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Table 38
84).