New In This Release; Features; Other Changes; Revision History - Nortel Communication Server 1000 Manual

.

New in this Release

The following sections detail what's new in DASS2 Fundamentals
(NN43001-571) for Communication Server 1000 Release 7.0:

Features

For Communication Server Release 7.0, the range of allowable Route List
Index (RLI) and Digit Manipulation Index (DMI) values is increased from
0–999 to 0–1999. For more information about RLI and DMI values, see
Table 35 "LD 86 Configure the VNS trunk route." (page

Other changes

See the following sections for information about changes that are not
feature-related:

Revision history

June 2010
May 2009
December 7, 2007
June 2007
May 30, 2007
July 2006
Standard 04.01. This document is up-issued to support
Communication Server 1000 Release 7.0.
Standard 03.01. This document is up-issued to support
Communication Server 1000 Release 6.0.
Standard 02.01. This document is up-issued to support
Communication Server 1000 Release 5.5.
Standard 01.02. This document is up-issued to remove the Nortel
Networks Confidential statement, and for changes in technical
content, including . the section Configuring Calling Line Identity.
Standard 01.01. This document is issued to support
Communication Server 1000 Release 5.0 This document
contains information previously contained in the following legacy
document, now retired: DASS2 (553-3001-371). No new content
has been added for Communication Server 1000 Release 5.0.
All references to Communication Server 1000 Release 4.5 are
applicable to Communication Server 1000 Release 5.0.
Standard 4.00. This document is up-issued for changes in
technical content, including descriptions and range values for
new overload protection counters.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
7
74).