Nortel Communication Server 1000 Manual page 50

50 Basic configuration
Table 19
Alarm condition thresholds for the ALRM prompt (cont'd.)
Alarm Mnemonic
FAE
HER
TSF
AIS
LOI
DAI
Table 20
LD 15 Define a DASS2 customer.
Prompt Response
REQ: NEW CHG
TYPE: CDB
CUST 0-99
0-31
....
LSC dddd
TIDM (NO) YES
DASC 1-4
Table 21
LD 16 Create service routes.
Prompt Response
REQ NEW CHG
OUT PRT
END
TYPE RDB
xx
CUST
PP
0-15 secs (2)
0-15 mins (1)
0-15 secs (0)
0-15 mins (1)
0-15 secs (0)
1-15 mins (1)
Description
Add or Change
Customer Data Block
Customer number
Range for Large System and CS 1000E system
Range for Small System, CS 1000S system, Media Gateway
1000B, and Media Gateway 1000T
Enter the location number that identifies this PBX.
Enter YES if the Trunk Group reference number of a Trunk
Identity is meaningful (as part of the CDP DN). Enter NO if the
PBX reference number is to be displayed without the Trunk
Group Reference Number.
Enter the access code that is to be placed on displays before
OLIs and TLIs received from the DASS2 trunk.
Entering the attendant's DN will remove an existing value.
The value defaults to nothing if <cr> is entered.
Description
Create new data base, modify existing data base, remove data
block, print data block, terminate program activity.
Route Data Block.
Customer number, as defined in LD 15.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
MM
0-24 hrs (1)
0-24 hrs (1)
0-24 hrs (0)
0-24 hrs (1)
0-24 hrs (0)
0-24 hrs (1)
CC
0-15 (4)
0-15 (10)
0-15 (0)
0-15 (4)
0-15 (0)
0-15 (5)