Nortel Communication Server 1000 Manual page 73

Table 31
LD 17 Associate VNS D-channel with VNS route. D-channel must be associated with each
node and customer (both ends of the D-channel link must be configured). (cont'd.)
Prompt Response
0-32700
VNSP
VCNA (NO) YES
VCRD (NO) YES
VTRO (NO) YES
Table 32
LD 96 Enable the D-channel that has been configured in LD 17.
Command
ENL DCH 0-63
ENL DCH 0-15
Table 33
LD 79 Define VNS DNs for both nodes/customers to be associated with the D-channel
configured in LD 17.
Prompt Response
REQ NEW
TYPE VNS
xx
CUST
VNDN
xxxxxxx
1-4000 xxxxxxx
<CR>
Note:
block, or create a new VNS VDN block.
Table 34
LD 16 Set up the VNS Bearer Trunk. The Bearer trunk must be associated with each node and
customer (both ends of the Bearer link must be configured).
Prompt Response
REQ NEW, CHG
xx
CUST
Description
Private Network Identifier (PNI) of the far-end customer.
Network Call Party Name Display is (not) available over the
D-channel.
Network Call Redirection is (not) available over the D-channel.
Trunk Route optimization Before Answer is (not) available over
the D-channel.
Description
Enable the D-channel 0-63 for Large System.
Enable the D-channel 0-15 for Small System.
Description
Add an individual VDN to Create a new VNS data block.
Virtual Network Services.
Customer number as defined in LD 15.
Individual VDN to be added.
1-4000 = number of contiguous VDN to be added,
xxxxxxx = first VDN to be added.
You can add another single VDN by entering <CR> (VDN is
prompted until <CR> is entered.)
For the above entries, the VDNs must be part of the customer's
numbering plan.
You can add a new individual VDN to an existing VNS VDN
Description
Add, or change data.
Customer number as defined in LD 15.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Feature implementation 73