Nortel Communication Server 1000 Manual page 137

Table 66
Protocol selection switch settings
Protocol
DASS2 (NT5K35/NT5K75 emulation)
ISDN (NT6D11AB/AC emulation)
Valid switch combinations
Table 67 "Port 0 switch settings" (page 137)
settings" (page 137)
for the NT6D11AE/AF (not including address switch settings).
Port 0
Port 0 can be configured as asynchronous ESDI, or disabled. If the port is
configured as disabled, it will not be visible to the system CPU.
Table 67
Port 0 switch settings
Mode
Asynchronous ESDI
Asynchronous ESDI
Port disabled
Port 1
The following are the only valid emulation modes combinations. If the port
is configured as disabled, it will not be visible to the system CPU.
Table 68
Port 1 switch settings
Mode
DASS2
ISDN
Expanded DASS2
Port disabled
show the only allowable switch setting combinations
SW1.1
1
1
1
Emulates
NT5K35AA
NT6D11AB/AC
NT5K75AA
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Setting up the NT6D11AE/AF 137
Switch Setting
SW3.1
0
1
and Table 68 "Port 1 switch
Switch setting
SW1.2 SW3.1
0
0
1
Switch setting
SW2.1 SW2.2
0 0
0 0
0 1
1 1
SW3.2
0
1
SW3.2
0 0
1 1
- -
SW3.1 SW3.2
0 0
1 1
0 0
- -