Nortel Communication Server 1000 Manual page 175

Table 94
IDA trunk maintenance commands available in LD 75 (cont'd.)
Command
DIS DTRC l c
STAT DDSL
STAT DDSL n
STAT DDCS
STAT DDCS l
STAT DTRC l c
STRT n
CDSP
CMIN u
Table 95
IDA trunk maintenance messages available in LD 75 DCHI
Message
DSBL NOT RESPONDING
DSBL RESPONDING
ENBL IDLE
ENBL STARTING
ENBL ACTIVE
Table 96
IDA trunk maintenance messages available in LD 75 PRI2 card
Message
DSBL NOT RESPONDING
DSBL RESPONDING
ENBL
Table 97
IDA trunk maintenance messages available in LD 75 B-Channels
Message
UNEQ
DSBL
IDA trunk maintenance commands and messages 175
Description
Disable real digital channel (loop, channel)
Give status of entire DCHI
Give status of DCHI port n
Give status of all PRI loops
Give status of PRI loop l, and a count of the number of channels in
each state.
Give status of real digital channel (loop, channel)
Start DCHI port n. The message "OK STARTING" is displayed and
further commands may be entered. Message DTM301 is displayed
when the link is started successfully.
Clear the display
Clear the minor alarm for customer u.
Description
The D Channel Handler is disabled and does not respond to a
read/write test. All channels are disabled.
The D Channel Handler is disabled. All channels are disabled.
The D Channel Handler is enabled, but all channels are disabled.
The D Channel Handler is enabled, but all channels are being
enabled.
The D Channel Handler is enabled, and all channels are enabled.
Description
The Network card is disabled and does not respond to a read/write
test.
The Network card is disabled.
The Network card is enabled.
Description
Not configured.
Disabled.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.