Nortel Communication Server 1000 Manual page 36

36 Hardware requirements
•
one NTCK43 dual-port PRI card (NTCK43AB or higher)
or
•
one NT8D72 Primary Rate Interface card (NT8D72BA is required for
EuroISDN applications)
or
•
one NT5D97 Primary Rate Interface card
•
one QPC949D CPU ROM (up to and including Group G) and
NTND08AA CPU ROM (up to and including Group H) are required to
support the expanded capability of the NT5K75 and NT6D11AE/AF
DCHI
•
one loop of the QPC414 ENET dual loop network interface card
•
one of the following cables:
—
—
—
—
—
•
one QCAD328 DCHI to PRI cable
•
one NT8D85 ENET to PRI cable for the NTCK43 DPRI card, the
following cables are used:
—
—
—
—
—
—
—
—
—
NT5K40AA PRI to Line Terminating Equipment cable (15 pin
D-type to twin BNC, 4 meters)
NT5K41AA PRI to Line Terminating Equipment cable (15 pin
D-type to twin BNC, 8 meters)
NT5K86AA PRI to Line Terminating Equipment cable (15 pin
D-type to twin BNC, 12 meters, TX shield connected to FGND)
NT5K86BA PRI to Line Terminating Equipment cable (15 pin
D-type to twin BNC, 12 meters, RX shield connected to FGND)
NT5K86AA PRI to Line Terminating Equipment cable (15 pin
D-type to twin BNC, 12 meters, TX and RX shields connected to
FGND)
NTCK45AA 120 Ohm Dual PRI to I/O Panel cable (8ft)
NTCK78AA 120 Ohm Dual PRI cable for ST Machines (50ft)
NTCK79AA 75 Ohm Dual PRI Coax Cable (40ft)
NT8D7217 Dual PRI I/O Panel to Multiplexer cable (50ft)
NTCK46AA Dual PRI to DASS/DPNSS NT6D11 DCHI cable (6ft)
NTCK46AB Dual PRI to DASS/DPNSS NT6D11 DCHI cable (18ft)
NTCK46AC Dual PRI to DASS/DPNSS NT6D11 DCHI cable (35ft)
NTCK46AD Dual PRI to DASS/DPNSS NT6D11 DCHI cable (50ft)
Clock Controller cables (1 to 2 port cables):
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.