12 Introduction
System migration
When you upgrade Meridian 1 systems to run Communication Server
1000 7.0 software and configure them to include a Signaling Server,
they become Communication Server 1000 systems.
systems to CS 1000 systems" (page 12)
supports an upgrade path to a Communication Server 1000 system.
Table 1
Meridian 1 systems to CS 1000 systems
This Meridian 1 system
Meridian 1 PBX 11C Chassis
Meridian 1 PBX 11C Cabinet
Meridian 1 PBX 61C
Meridian 1 PBX 81C
For more information, see one or more of the following documents:
•
Communication Server 1000M and Meridian 1: Large System Upgrade
Procedures (NN43021-458)
•
Communication Server 1000E: Upgrade Procedures (NN43041-458)
•
Communication Server 1000E Upgrade - Hardware Upgrade
Procedures (NN43041-464)
Intended audience
The intended audience of this document is as follows:
•
network data managers, design personnel, marketing personnel, and
anyone requiring information about DASS2
•
network data administrators and technicians responsible for DASS2
connections
•
individuals responsible to install DASS2 networks
•
technical staff responsible to maintain DASS2 networks
Related information
This section lists information sources that relate to this document.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Table 1 "Meridian 1
lists each Meridian 1 system that
Maps to this CS 1000 system
CS 1000E
CS 1000E
CS 1000M Single Group
CS 1000M Multi Group