Nortel Communication Server 1000 Manual page 100

100 Integrated Digital Access (IDA) equipment
External DCH cable
The NTCK46 cable connects the DDP2 card to the NT6D11AF/NT5K75
AA/NT5K35AA D-Channel Handler card. The cable is available in four
different sizes:
•
NTCK46AA (6 ft.) - DDP2 to DCH cable
•
NTCK46AB (18 ft.) - DDP2 to DCH cable
•
NTCK46AC (35 ft.) - DDP2 to DCH cable
•
NTCK46AD (50 ft.) - DDP2 to DCH cable
Figure 23
NTCK46AA/AB/AC/AD
Cable diagrams
Figure 24 "DDP2 cable with an I/O panel" (page 101)
"DDP2 cable without an I/O panel" (page 102)
cabling configurations for the DDP2.
Figure 24 "DDP2 cable with an I/O panel" (page 101)
DDP2 cabling for a system with an I/O panel, with the connection between
the I/O panel and a Network Channel Terminating Equipment (NCTE).
Figure 25 "DDP2 cable without an I/O panel" (page 102)
a system without an I/O panel. Here, the DDP2 faceplate is cabled directly
to the NCTE.
Note:
represented in the diagrams. Refer to
105)
Since several clock cabling options exists, none has been
for a description on each available option.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
and Figure 25
provide examples of typical
shows a typical
shows cabling for
"Clock configurations" (page