Ida Start-Up - Nortel Communication Server 1000 Manual

Table 92
IDA status check (cont'd.)
Step Action
6
Check to assure the following IDA cables
are connected correctly:
•
PRI to DCHI cable
•
2Mb/s transmission cable from
NT8D72BA to DSX (the digital cross
connect)

IDA start-up

Table 93 "DASS2 start-up" (page 173)
the PRI and DCHI from a disabled to an operational state.
Table 93
DASS2 start-up
Step Action
1 Check the status of PRI cards.
2
Enable PRI using:
LD 75
ENL DDCS l(loop)
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Response
32 UNEQ
30 DSBL
provides the steps required to take
Response
The PRI shown is disabled.
ENBL
IDA start-up 173