Midmounting The Junos Space Appliance In A Two-Post Rack - Juniper JA2500 Junos Space Hardware Manual

Related
Documentation

Midmounting the Junos Space Appliance in a Two-Post Rack

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack on
page 35
Junos Space Appliance Rack Requirements on page 27
Midmounting the Junos Space Appliance in a Two-Post Rack on page 37
Tools and Parts Required to Install the Junos Space Appliance on page 28
This option is suitable for a two-post equipment rack. It allows the appliance to be
mounted so that there is even clearance on the front and rear of the rack.
To mount the appliance in a two-post rack, do the following:
Remove the two front-mount rails from either side of the chassis.
1.
Insert one midmount bracket to the center on either side of the chassis.
2.
Attach the chassis to the equipment rack and insert the other two midmount brackets
3.
on either side of the appliance to secure the chassis to the backs of the post, as shown
in Figure 8 on page 37.
Figure 8: Midmoounting in a Two-Post Rack
Verify that the mounting screws on one side of the rack are aligned with the mounting
4.
screws on the opposite side and that the appliance is level.
Front-and-Rear Mounting the JA2500 Junos Space Appliance Flush to a Rack on
page 35
Chapter 5: Installing the Appliance
37