Midmounting The Ja2500 Appliance In A Two-Post Rack - Juniper Junos Space JA2500 Quick Start Manual

Copyright © 2018, Juniper Networks, Inc.
Figure 4: Front-and-Rear Mounting Recessed in a Rack
Insert locking screws on the sides of the rear-mount brackets to secure the front and
6.
rear mounting brackets in place.
Verify that the mounting screws on one side of the rack are aligned with the mounting
7.
screws on the opposite side and that the appliance is level.

Midmounting the JA2500 Appliance in a Two-Post Rack

This option allows the appliance to be mounted so that there is even clearance on the
front and rear of the rack.
To mount the appliance in a two-post rack, do the following:
Remove the two front-mount rails from either side of the chassis.
1.
Insert one midmount bracket to the center on either side of the chassis.
2.
Attach the chassis to the equipment rack and insert the other two midmount brackets
3.
on either side of the appliance to secure the chassis to the backs of the post, as shown
in Figure 5 on page 10.
Midmounting the JA2500 Appliance in a Two-Post Rack
9