Security Functions
9.2.2 PLC Protection (Password Protection)
You can set a new password with up to 8 characters, or change an existing one.
To access a PLC for which a password has been set, a login is required whenever the power
is turned on.
To set a password, you can use:
•
the programming tool
•
the SYS1 instruction
!
REFERENCE
For details on the SYS1 instruction, please refer to your Programming Manual
or to the FPWIN Pro online help.
252
•
Be sure to memorize your password. Without the password, you
will not be able to read programs on password-protected PLCs.
•
If you have forgotten your password, our support team will not be
able to reset it for you.
•
If you are not logged in, [Clear Password] will erase not only the
password but also the program and parameters stored in the
PLC's comment memory.
FPΣ User's Manual