Optional Equipment - JUKI SADE Operating Instructions Manual

Industrial Sewing Machine SADE
A special scanner is mounted at the bobbin winding station (clause 5.7, figure 28). Pur-
pose of this scanner is to check for proper application of the traceability barcode label to
the bobbin being winded with the appropriate thread. See section 5.7.
JUKI SADE comes with 4 scanners attached. Optional is a 5th scanner to scan the
bobbin after inserting it into the bobbin case.
Scanners on the stand for thread spools give an information about the thread presence
and its type (colour, thickness).
Fig. 20. Scanners of proper thread conducting
Scanners of proper thread conducting are placed at several places on the machine.
Chip card reader
The chip card reader offers a secure alternative to the numeric code used to identify us-
ers to the JUKI SADE. Simply hold the RFID card to the reader and the user is automat-
ically logged in if his RFID card has been registered in the SADE software under user
management.

3.4 Optional equipment

The basic equipment of the machine are: operating instructions, spare parts list and
warranty card.
The usual tools such as screwdriver, flat wrench and allen wrench are supplied with the
machine. They are used to monitor height regulation.
An optional equipment of the machine is numeric keypad. You can choose a printer
model while ordering the machine.
You can also order with the machine a special set of weights for thread tension calibra-
tion.
40