2-8. Installing the thread stand
❶
2-9. Attaching the connecting rod
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and a lapse of 5 minutes or more.
❷
Fix connecting rod ❶ to installing hole ❹ of pedal
❸
❹
lever ❷ with nut ❸ .
❸
❶
– 11 –
1) Assemble the thread stand unit, and in-
sert it in the hole in the machine table.
2) Tighten nut ❶ .