5. Detach two screws and remove the concealing lid.
6. Pass the vendor cable through the aperture of IF mounting.
7. Fix the vendor cable by using two screws which removed in step 5.
8. Attach the ground terminal of the vendor cable to the IF mounting by using one screw (M4×8).
9. Connect the vendor cable connector to the main unit signal line connector.
Screw
Figure 1-2-54
Vendor cable connector
Screw
Screw
Figure 1-2-55
IF mounting
Main unit
signal line connector
Figure 1-2-56
Screw
Concealing lid
Aperture of IF mounting
Vendor cable
Ground terminal
Vendor cable connector
1-2-36
Screw
2RG/2RH