Kyocera Copystar CS 3011i Service Manual page 167

U206 Sets the coin vendor
(Message: Set Coin Vendor Mode)
Description
Sets the optional Coin Vendor connection.
Also, sets the details such as the operation mode and unit price when the coin vendor is installed. (This is
an optional device which is currently supported only by Japanese specification machines.)
Purpose
To run this maintenance item if a coin vendor is installed.
Method
1.Press the [Start] key.
2.Select the item to set.
*: The screen for setting is displayed.
On/Off Config
No Coin Action
Price
Boot Mode
Apl Charge Mode
Setting: On/Off Config
1.Select the item to set.
On
Off
*: Initial setting: Off
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: No Coin Action
1.Select the item to set.
All Clear
Auto Clear
Off
*: Initial setting: Off
2.Press the [Start] key to set the setting value.
Items
Sets the presence or absence of the coin vendor
Behavior when change runs out during copying
Charge per copy by size and color
Setting activation mode
Extended charge unit price
Items
The coin vendor is installed
The coin vendor is not installed
Items
All clear at coin shortage
Auto clear at coin shortage
Do nothing at coin shortage
Contents
Contents
Contents
1-3-84
2RG/2RH