Kyocera Copystar CS 3011i Service Manual page 116

U031 Check the conveying switch
(Message: Check Conveying Switch)
Contents
Displays the on/off status of each switch and sensor to detect paper on the paper conveying path.
Purpose
Execute to check the conveying switches and sensors are operating correctly.
Method
1.Press the [Start] key.
2.Check the switches and sensors by manually turning them on/off.
3.The switch indication is inversed when the switch is detected.
Regist
Fuser
Duplex
Face Down Tray Full
Job separator Full
FeedB
FeedC
Bridge1
Bridge2
Contain
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Display the registration sensor (RS) status
Displays the eject sensor (ES) status
Displays the duplex sensor (DUS) status
Display the paper full sensor (PFS) state
Display the job paper full sensor (JPFS) state
Displays the feed sensor 1 (FS1) status
Displays the feed sensor 2 (FS2) status
Displays the bridge conveying sensor 1 (BRCS1) switch status
Displays the bridge conveying sensor 2 (BRCS2) switch status
Displays the toner container switch (TCSW) status
Contents
1-3-33
2RG/2RH-1